IOI Technology Corporation
Your I/O Solution Provider

S2-CF01 is a SATA to CF (Compact Flash) bridge board. It’s ideally suited for tailgate interface applications for converting CF memory card to Serial ATA storage device.
S2-CF01 enables CF memory card to be used as a direct replacement for a 2.5" SATA hard drive. As a result, any equipment, such as Notebook computer, that uses a 2.5" SATA hard drive can be easily converted to use the low power and shock resistant CF memory card.

• Enable CF memory card to be used like standard 2.5" SATA hard drive
• SATA interface
• Supports Serial ATA Generation 2 transfer rate of 3.0 Gbp/s
• Supports connection to Port Multiplier or Hardware Port Multiplier
• Mounts directly onto notebook 2.5" SATA connector
• CF Card can be the primary bootable device containing the OS and applications.
• Transparent to the operating system and does not require any drivers

• SATA Interface:
  • SATA 7+15pin male connector
  • Serial ATA Generation 2 transfer rate of 3.0 Gbp/s
  • SATA power save modes.
  • SATA hot-plug.
  • SATA 3Gb/s-standard Set Features for disabling device-initiated SATA power
• Media Interface: CF(Compact Flash)
  • CompactFlashTM cards (Type I & II)
• AT Attachment with Packet Interface Extension (ATA/ATAPI-7) Compliant:
  • ATA/ATAPI PIO mode data transfer.
  • ATA/ATAPI UDMA data transfer rates of 16.7, 25, 33, 44, 66, 100, 133, and 150 MB/s.
  • ATA/ATAPI PACKET Command feature set which supports INF-8090i packet commands.
  • Tagged command queuing (maximum 32 entries).
  • ATA/ATAPI-7 streaming feature set.
  • ATA/ATAPI-7 Force Unit Access commands.
  • ATA/ATAPI 48-bit Address feature set.
• Jumper for selecting 1.5Gbp/s or 3.0Gbp/s.

• With 2.5" HDD frame bracket

• 53mm x 74mm(2" x2.91 ")
• Direct Connect Vertical type

Kit 1:

• S2-CF01 - SATA to CF Bridge Board

Kit 2:

• S2-CF01 - SATA to CF Bridge Board
• 2.5" HDD Frame Bracket
• Screws for mounting